How to connect the player to a wireless network
Please follow the steps below to connect your player to your wireless network.
-
Connect to your router: Connect the Dentli Player to your router with an Ethernet (LAN) cable.
💡 One end must be connected to the Dentli player and the other to your router/switch/wall.
-
Access Network Settings: When the player appears online on your dashboard, enter your wireless network credentials in the Dentli Portal, specifically within the Network Tab.
-
Select your network: If you are unsure of the WiFi network name, click the “Scan for available WiFi” button and wait for the player to finish scanning. A dropdown list will display the available scanned WiFi networks.
- 💡 If the WiFi network is hidden, it won't be detected during the scan.
- Select the WiFi mode: Choose the appropriate security protocol.
- 💡 For simple WiFi networks with a standard password, select the WPA/WPA2 option.
Enter the password: Type the WiFi password. If you are unsure whether you have entered the correct password, click the “Test Connection” button and wait for the player to attempt a connection.
-
Save Configuration: After clicking “Save”, a blinking message saying “Configuring” will display at the bottom right of your screen for about 1-2 minutes.
- 💡 Please do not unplug or reboot the player in this state. You can safely remove the Ethernet cable when the message disappears from your screen
Verify Connection: Unplug the Ethernet cable and make some content changes in the dashboard to ensure the player responds to the new updates via your wireless network.